Car Accessories
Only displaying products from Maplin Electronics Ltd (show all)
12V 4W BA9s MCCSide & Tail Bulb · Replacement side & tail 12V 4W BA9s MCC bulb · Supplied in packs of 2
more...
These offer a much increased light output and greater efficiency when compared to standard types. As a result, they make enhanced substitute bulbs for applications such as cycle lamps, torches and security products. However, because they are much brighter than standard bulbs, life is reduced to...
more...
Moulded body with built-in resistance for 220-240V use. Available with red, green or amber lens. Requires a 10mm mounting cut-out in panel. Overall dimensions: 38mm long, 12mm square lens.
more...
Moulded body with built-in resistance for 220-240V use. Available with red, green or amber lens. Requires a 10mm mounting cut-out in panel. Overall dimensions: 38mm long, 12mm square lens.
more...
· Run two 12Vdc accessories from your lighter socket · Output voltage 2 x DC 12V, 3.5A per socket · LED power indicator · Folds up or down 90° for maximum versatility · Fitted with a 20mm 10A fastblow fuse · Replacement fuses available - Maplin...
more...
· Two voltages available: 2.2V 250mA (average life 5 hours) and 3.7V 300mA (10 hours) Two voltages available: 2·2V 250mA, average life 5 hours and 3·7V 300mA, average life 10 hours.
more...
In-car type fuseholder moulded from clear plastic in two parts. These screw-together items house two collars and a spring. Termination is via screw terminals. Cable acceptance: 1mm to 2.64mm Rated at 10A, 250Vac when used within equipment, otherwise the maximum voltage is limited to 50Vac/dc.
more...
In-car type fuseholder moulded from clear plastic in two parts. These screw-together items house two collars and a spring. Termination is via screw terminals. Cable acceptance: 1mm to 2.64mm Rated at 10A, 250Vac when used within equipment, otherwise the maximum voltage is limited to 50Vac/dc.
more...
Black nylon in-line fuseholder suitable for use with the standard plug-in type blade fuses. To use, cut the red wire connected between both terminals to give lead-outs to each terminal. Access to the fuse is by means of a snap-fit lid on the top of the holder, and several of these holders can be...
more...
Filter these results by retailer
View just Car Parts at Drinkstuff.com Tooled Up DIY Tools Pixmania Screwfix Direct Maplin Electronics Ltd
